Unbleached Bone Saddle – Fits Many Post-2010 Seagull® Guitars – 11 mm Height

(1 customer review)


  • Fits Many Post-2010 Seagull Guitars
  • Real Bone, Unbleached
  • Length: 73 mm
  • Thickness: 3.3 mm
  • Height: 11 mm
  • Radius: 16 inches
  • Compensation: Zig Zag


MacNichol Guitars Logo Small


Looking for a Seagull bone guitar saddle? Our unbleached bone saddle will fit many newer Seagull guitars, including those from the Artist, Maritime, Performer, Coastline, S6, and Entourage Series. This saddle will also work with models of varying body shapes, including Dreadnought, Mini Jumbo, and Concert Hall.

Please contact us with your guitar’s model and year for which bone guitar saddle size would work best. For Seagull guitars built prior to 2010, consider the following link: Fully Compensated Saddle with 16 Inch Radius

Many guitarists prefer bone saddles for the full, rich tone produced.

Please note that each guitar has slight differences and your new unbleached bone guitar saddle may need adjustments to the height, length, or thickness to match your factory Seagull guitar saddle. We include a small piece of sandpaper for you to use for adjustments.

Please contact us with any questions about fitting your saddle’s action height, intonation, or any other aspect. If you are not entirely satisfied, please let us know and we’ll either provide a replacement saddle or a refund.


MacNichol Guitars

MacNichol Guitars provides high quality bone saddles that last a long time and produce excellent tone. Inexpensive, low quality bone saddles are often overly porous and whitened with harsh chemicals, resulting in weak bone that does not last and produces poor tone. We help you find the right saddle – length, height, thickness, radius, and compensation – for your specific guitar. Once you receive the saddle, contact our free expert support with any questions on installation. Not entirely satisfied? We will send a free replacement or full refund.
MacNichol Guitars Logo Small

1 review for Unbleached Bone Saddle – Fits Many Post-2010 Seagull® Guitars – 11 mm Height

  1. Arch

    Purchased this for a Seagull Entourage (spruce) that came with a TUSQ saddle. The guitar seemed a little bright to the point of being brash. This bone saddle fit perfectly without sanding. It tamed the high end and provided a a smoother overall sound and intonation was spot on. Very pleased.

    Also, purchased one of these for a Seagull S6 (cedar) that came with a TUSQ saddle. Again the guitar’s sound was a bit brash, almost harsh. The bone saddle fit perfectly, except for the electric pickup ribbon was under the saddle. The bone saddle improved the overall tone–smoothed it out.

Only logged in customers who have purchased this product may leave a review.