Bone Saddle – Fits Many Martin® Guitars – 11 mm Height – Wave Compensated

(1 customer review)

$19.00

  • Length: 74 mm
  • Thickness: 2.5 mm
  • Height: 11 mm
  • Radius: 16 inches
  • Compensation: Wave

 

SKU: FBS11R100 Category: Tags: ,
MacNichol Guitars Logo Small

Description

Are you searching for a Martin guitar saddle? Our 11 mm height compensated bone saddle will fit many Martin body shapes, including dreadnought, OM, OOO, as well as many series, including the Standard, X, Road, Modern Deluxe, and Junior.

Note: This saddle will not fit guitars with saddles that go entirely through the bridge lengthwise. Please contact us for more information on which saddle will fit your guitar. Please contact us with your guitar’s model and year for which saddle size would work best.

Additionally, our saddle has a 2.5 mm thickness to allow you to adjust to a snug fit in your guitar bridge. Some of our competitors make saddles to a 3/32 inch specification, which translates to a 2.4 mm thickness, which can result in a loose fit in the bridge slot.

If you need a 10 mm height saddle instead, please see the following link.

Bone Saddle – Fits Many Martin Guitars – 10 mm

Please note that each guitar is slightly different and your new bone saddle may need adjustments to the height, length, or thickness to match your factory Martin guitar saddle. We include a piece of sandpaper for you to make adjustments.

Please let us know of any questions regarding fitting your saddle’s action height, intonation, or any other factor. If you are not fully satisfied, please let us know and we’ll either provide a replacement saddle or a refund.

Brand

MacNichol Guitars

MacNichol Guitars provides high quality bone saddles that last a long time and produce excellent tone. Inexpensive, low quality bone saddles are often overly porous and whitened with harsh chemicals, resulting in weak bone that does not last and produces poor tone.We help you find the right saddle – length, height, thickness, radius, and compensation – for your specific guitar. Once you receive the saddle, contact our free expert support with any questions on installation. Not entirely satisfied? We will send a free replacement or full refund.
MacNichol Guitars Logo Small

1 review for Bone Saddle – Fits Many Martin® Guitars – 11 mm Height – Wave Compensated

  1. Jonathan Pearl

    This replaced the original Tusq saddle on a Martin Road series guitar. I ordered it at 10 mm height to match the existing saddle. Only a bit of sanding with the included sandpaper was necessary for the saddle thickness to fit the bridge slot. The bone saddle has increased tonal resonance, especially while strumming chords.

Add a review

Your email address will not be published. Required fields are marked *